News

We are now upgraded to the newest version of phpBB. It has more features. Enjoy.

If you've forgotten your password or are having trouble logging in, CLICK HERE for a reset password to be sent to you.

AR Quad Rails

Anything to do with rifle shooting, plinking, target, benchrest etc

Moderator: Moderators

User avatar
J
Marksman V
Marksman V
Posts: 100
Joined: Tue Jan 18, 2011 1:00 am

AR Quad Rails

Postby J » Mon Jan 12, 2015 11:17 pm

Working on a new AR build and will be putting a FF 15" handguard. Ive been looking at the Midwest Industries T series or one of the Gen 2 versions. Anyone have any thoughts on MI? What brands do you think make the best FF handguards? Also, I need the inside diameter larger than 1.25. Thanks.



User avatar
J
Marksman V
Marksman V
Posts: 100
Joined: Tue Jan 18, 2011 1:00 am

Postby J » Mon Mar 16, 2015 7:43 pm

So I went ahead and put on a MI Gen2 SS Series FF rail. For some reason the quad rail bows in the middle. It sits ALMOST flush with my upper receivers rail (barely noticeable). When I put it upside down on a flat surface, so its laying on the rail, you can see that its not totally flat. Is this normal? This is my first FF quad rail I put on.

User avatar
SR9
Admin
Admin
Posts: 2069
Joined: Thu Feb 12, 2009 1:00 am
Location: Bethlehem, CT

Postby SR9 » Tue Mar 17, 2015 4:21 pm

I would say it is defective. The rail should be square on all sides, at leat the ones I have seen were.
"Those who make peaceful revolution impossible will make violent revolution inevitable." - John F. Kennedy 1962

NVPL : http://www.nvpl.greatatlantictrophy.com/
WLOPA : http://www.wlopa.com/index.htm

User avatar
JohnB
Master II
Master II
Posts: 1012
Joined: Fri Dec 09, 2005 1:00 am

Postby JohnB » Tue Mar 17, 2015 7:54 pm

is it metal..alloy..etc or a polymer ?

User avatar
SR9
Admin
Admin
Posts: 2069
Joined: Thu Feb 12, 2009 1:00 am
Location: Bethlehem, CT

Postby SR9 » Wed Mar 18, 2015 4:06 pm

JohnB wrote:is it metal..alloy..etc or a polymer ?


Its T6061 Aluminum.
"Those who make peaceful revolution impossible will make violent revolution inevitable." - John F. Kennedy 1962



NVPL : http://www.nvpl.greatatlantictrophy.com/

WLOPA : http://www.wlopa.com/index.htm

User avatar
JohnB
Master II
Master II
Posts: 1012
Joined: Fri Dec 09, 2005 1:00 am

Postby JohnB » Wed Mar 18, 2015 10:09 pm

they say its CNC machined so it should be pretty close...how much off are you talking ? has to be some tolerance...did you try it with a real straight edge or another surface that should be flat ? that can give a false reading too


Return to “Rifle”

Who is online

Users browsing this forum: No registered users and 11 guests