- Wed May 01, 2013 12:01 pm
#51654
I'm new to reloading, actually haven't reloaded yet, but i have my press set up and have been removing the old primers.
I've been using once fired brass that i picked up at the range. Most of the primers come out easily. However, every so often part of the primer appears to get stuck in the case. Since it's the outside of the old primer that gets stuck, there is no way to remove the rest of the primer. So theres no way to press in a new primer.
I've been saving these cases in hopes that someone can help me resolve this issue.
Marino
I've been using once fired brass that i picked up at the range. Most of the primers come out easily. However, every so often part of the primer appears to get stuck in the case. Since it's the outside of the old primer that gets stuck, there is no way to remove the rest of the primer. So theres no way to press in a new primer.
I've been saving these cases in hopes that someone can help me resolve this issue.
Marino
<div>"Those who would give up essential liberty to purchase a little temporary safety, deserve neither liberty nor safety."<br>- Benjamin Franklin</div>