Page 5 of 8

Posted: Thu May 24, 2012 10:09 am
by newguy
This is basically the same thing as the hot water and dish soap Cost 15.99 at Cabelas but least when ya run out of the cleaning stuff you can use the hot water and dish soap


http://www.cabelas.com/product/Shooting ... t104635080

Posted: Thu May 24, 2012 10:11 am
by myglimk2
So after cleaning them that way is there really any need to tumble them?

Posted: Thu May 24, 2012 10:13 am
by newguy
Not unless ya wanna make them shiny all dirt and powder is off them after this. What people don't release i think most of the time is tumbling not gonna clean inside of the cases. Were a Sonic cleaner or this way cleans inside and out

Posted: Thu May 24, 2012 10:16 am
by myglimk2
I'm not so worried about making them shiny, just wanna make sure they are clean and free of any debris.

Posted: Thu May 24, 2012 10:20 am
by newguy
I agree that most important part don't wanna ruin dies sizing die takes a beating from dirty brass

Posted: Thu May 24, 2012 10:25 am
by myglimk2
Should I Deprime then clean them?

Posted: Thu May 24, 2012 10:32 am
by newguy
i normally clean with old primer in and then use a pocket primer cleaning tool but others may do differently. Since i been tumbling now i leave them in so media doesn't get stuck in pocket

Posted: Thu May 24, 2012 11:13 am
by Mopar
myglimk2 wrote:Was a little hard to read that, but still some good info. :lol:
Do you have a link on where you got that information?
http://www.facebook.com/groups/thereloa ... 769430546/

Dunno if you can see that without being a member of the group.

Posted: Thu May 24, 2012 11:18 am
by myglimk2
Mopar wrote:
myglimk2 wrote:Was a little hard to read that, but still some good info. :lol:
Do you have a link on where you got that information?
http://www.facebook.com/groups/thereloa ... 769430546/

Dunno if you can see that without being a member of the group.
I was able to see it. Thanks for the link! :D

Posted: Thu May 24, 2012 2:49 pm
by Mopar
I added you to the group to make sure you could see it, it's a reloading group on facebook. Great bunch of guys and gals.

Posted: Thu May 24, 2012 2:51 pm
by myglimk2
Mopar wrote:I added you to the group to make sure you could see it, it's a reloading group on facebook. Great bunch of guys and gals.
Awesome! Thanks man!

Posted: Thu May 24, 2012 3:07 pm
by JohnFH
after tumbling my brass it is clean inside and out

Posted: Thu May 24, 2012 7:23 pm
by JohnFH
We have created a spoiled reloader :lol:

Posted: Thu May 24, 2012 7:33 pm
by GreggAndrews
We have created a spoiled reloader
Pretty soon he's going to be bumming primers, powder & bullets... :roll:

Posted: Thu May 24, 2012 7:41 pm
by JohnFH
He already gave me a deposit for the primer group buy, he is going to be The Oracle jr.